How to Configure VNX Unisphere Domains

unisphere_domainVNX storage arrays have a concept of Unisphere Domains which let you manage multiple arrays from one Unisphere GUI. To manage two or more arrays from a single pain of glass you need to join their storage domains. There are typically two scenarios:

  1. Joining arrays of the same generation, such as VNX to VNX or Clariion to Clariion (VNX1 and VNX2 are considered as one generation)
  2. Joining arrays of different generations, such as Clariion to VNX

Same generation arrays

When joining same generation arrays to a single domain you get the benefit of having consistent domain-wide settings across all arrays in the domain, such as: DNS, NTP, LDAP and Global Users. If you go to Unisphere Home screen and click on the Domain button you will find where all domain-wide settings are configured. Once they are set up these settings propagate to all systems within the domain.

domain_settings

There’s also a concept of Domain Master, which keeps and distributes domain-wide settings. Domain Master can be changed manually if you wish to do so by using the Select Domain Master wizard.

To add a new system to the same domain simply click on Add/Remove Systems and follow the wizard.

Different generation arrays

It’s very uncommon to see a Clariion these days, but if you still have one and want to have a single management interface across both your Clariion and VNX arrays you have to use Multi-Domains. You won’t get the benefit of having the same domain-wide settings, but if you have just 2 or 3 arrays it’s not really that hard to set them up manually.

To add a new domain to Multi-Domain configuration click on Manage Multi-Domain Configurations, specify VNX Service Processor IP and assign a name. System will be added to the list of Selected Domains.

add_vnx

Always add another domain to Multi-Domain configuration on a system which is running the highest release of Unisphere within the Multi-Domain, otherwise you’ll get the following error:

This version of user interface software does not support the management server software versions on the provided system.

add_vnx_error

Once the system is added you will see both arrays in the systems list and will be able to manage both from one Unisphere interface. For the sake of demonstration I used two VNX arrays in the screenshot below. But the same process applies to Clarrion arrays.

two_arrays

Local and global users

Unisphere has two types of user accounts – local and global. Local account can manage the system you have connected to and global account can manage all systems within the same domain.

By default, when array is being installed, global security is initialized and one global user is created. There are no local user accounts on the system by default, which is fine, because each array is created as a member of its own local domain.

In a Multi-Domain configuration you need to make sure you’re logging in to Unisphere using an account, which exists in every domain being managed. Otherwise, each time you log in to Unisphere you will have to manually login to the remote domain on the domain tab, which is quite annoying.

If you have different accounts on each of the arrays, make sure to make them consistent across all systems.

domain_login

Conclusion

In this post in a few simple steps we went through the Unisphere single domain and multi-domain configurations. If you want to know more details about Unisphere Domain management refer to EMC white paper “Domain Management with EMC Unisphere for VNX“.

Advertisements

Tags: , , , , , , , , , ,

One Response to “How to Configure VNX Unisphere Domains”

  1. Issue Joining VNX1 and VNX2 Unisphere Domains | Niktips's Blog Says:

    […] Solution is to upgrade Block OE to a version higher than Flare 32 Patch 209 where SSL 3.0 is disabled. Or as a workaround you can connect arrays in a Multi-Domain. To find out how, read one of my earlier blog posts: How to Configure VNX Unisphere Domains […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: