[SOLVED] Migrating vCenter Notifications

Why is this a problem?

VMware upgrades and migrations still comprise a large chunk of what I do in my job. If it is an in-place upgrade it is often more straightforward. The main consideration is making sure all compatibility checks are made. But if it is a rebuild, things get a bit more complicated.

Take for example a vCenter Server to vCenter Server Appliance migration. If you are migrating between 5.5, 6.0 and 6.5 you are covered by the vCenter Server Migration Tool. Recently I came across a customer using vSphere 5.1 (yes, it is not as uncommon as you might think). vCenter Server Migration Tool does not support migration from vSphere 5.1, which is fair enough, as it is end of support was August 2016. But as a result, you end up being on your own with your upgrade endeavours and have to do a lot of the things manually. One of such things is migrating vCenter notifications.

You can go and do it by hand. Using a few PowerCLI commands you can list the currently configured notifications and then recreate them on the new vCenter. But knowing how clunky and slow this process is, I doubt you are looking forward to spend half a day configuring each of the dozens notifications one by one by hand (I sure am not).

I offer an easy solution

You may have seen a comic over on xkcd called “Is It Worth The Time?“. Which gives you an estimate of how long you can work on making a routine task more efficient before you are spending more time than you save (across five years). As an example, if you can save one hour by automating a task that you do monthly, even if you spend two days on automating it, you will still brake even in five years.

Knowing how often I do VMware upgrades, it is well worth for me to invest time in automating it by scripting. Since you do not do upgrades that often, for you it is not, so I wrote this script for you.

If you simply want to get the job done, you can go ahead and download it from my GitHub page here (you will also need VMware PowerCLI installed on your machine for it to work) and then run it like so:

.\copy-vcenter-alerts-v1.0.ps1 -SourceVcenter old-vc.acme.com -DestinationVcenter new-vc.acme.com

Script includes help topics, that you can view by running the following command:

Get-Help -full .\copy-vcenter-alerts-v1.0.ps1

Or if you are curious, you can read further to better understand how script works.

How does this work?

First of all, it is important to understand the terminology used in vSphere:

  • Alarm trigger – a set of conditions that must be met for an alarm warning and alert to occur.
  • Alarm action – operations that occur in response to triggered alarms. For example, email notifications.

Script takes source and destination vCenter IP addresses or host names as parameters and starts by retrieving the list of existing alerts. Then it compares alert definitions and if alert doesn’t exist on the destination, it will be skipped, so be aware of that. Script will show you a warning and you will be able to make a decision about what to do with such alert later.

Then for each of the source alerts, that exists on the destination, script recreates actions, with exact same triggers. Trigger settings, such as repeats (enabled/disabled) and trigger state changes (green to yellow, yellow to red, etc) are also copied.

Script will not attempt to recreate an action that already exists, so feel free to run the script multiple times, if you need to.

What script does not do

  1. Script does not copy custom alerts – if you have custom alert definitions, you will have to recreate them manually. It was not worth investing time in such feature at this stage, as custom alerts are rare and even if encountered, there us just a handful, that can be moved manually.
  2. Only email notification actions are supported – because they are the most common. If you use other actions, like SNMP traps, let me know and maybe I will include them in the next version.

PowerCLI cmdlets used

These are some of the useful VMware PowerCLI cmdlets I used to write the script:

  • Get-AlarmDefinition
  • Get-AlarmAction
  • Get-AlarmActionTrigger
  • New-AlarmAction
  • New-AlarmActionTrigger
Advertisements

Tags: , , , , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: